Go to homepage
Cart
Skip image gallery

Interflon Degreaser EM30+ (aerosol)

Powerful cleaner and degreaser

$28.77

  • NSF K1/K3 degreaser
  • For heavy oil and grease deposits
  • Long effectiveness; slow evaporation
  • Highly versatile cold degreaser
  • Leaves no residue after use
Product number: 9566 | Product unit: aerosol
Documents

Product information "Degreaser EM30+ (aerosol)"

  • Industrial Strength Yet Food Grade Approved
  • Good Cleaning Properties Where There Is Excessive Pollution
  • Very Effective with Slow Evaporation
  • Evaporates Without Leaving Residues Behind
  • Excellent Replacement for Acetone
  • Suitable For Use in HACCP Environments
  • Can Be Used for Spraying (Aerosol) and Parts Washers
  • Non-Hazardous


Highly versatile degreaser for use in food processing areas. Excellent for tough cleaning jobs. Gently breaks down the composition of heavy greases, oils, grime, dirt, graphite and carbon residue. Removes tar, paint, silicone, glues, hotmelt, resins, polymers, gasket sealant, adhesives, waxes, bitumen, dyes, inks, paints, sugars, syrups, labels and graffiti too. Very effective cold degreaser on engines, chains, gearwheels, conveyors, bearings, slides and many other machine parts, as well as on hard stone, tiles, floors, walls etc.

Meets and exceeds all regulatory guidelines of the FDA; NSF Class K1/K3. Excellent replacement for hazardous cleaning systems. Can be used safely plant wide to meet the demands of modern clean room cleaning and degreasing.

Application areas

Interflon Degreaser EM30+ (aerosol) is especially developed for cleaning parts that are strongly polluted by oil residues or grease, dirt, soil and paint residues, on parts such as chains, motors, machines, plating, slides, floors in workshops, etc.

Instructions for use

Spray a thin layer of Interflon Degreaser EM30+ (aerosol) on the object that has to be cleaned. The best result is obtained by first applying Interflon Degreaser EM30+ (aerosol) for a few minutes before wiping away the dirt. For use in the food industry all food products and packaging materials must be removed or covered before cleaning. After using all surfaces must be washed with a detergent solution and rinsed with potable water. It is advisable to test a small inconspicuous area to make sure that the cleaning agent does not adversely affect or damage the surface being cleaned. Do not apply to hot surfaces. When cleaning large vertical areas, apply the product from the bottom and work upwards ensuring that the whole area is covered. Cleaning away any dirt is best done from the top in a downwards direction to prevent leaving any streak marks. Do not use the product or allow to dry in direct sunlight. Note: Interflon Degreaser EM30+ (aerosol) is a very strong cleaner which can affect elastomers and rubbers.

Specifications

Micpol Technology: No
Dynamic viscosity at 20°C norm: ASTM D2983
Evaporation speed: 15 (ether = 1)
Max operating temperature (C): 30
Halal: Yes
Kosher: Yes
Shelf_life (years): 2
NSF PFAS free: Yes
Suitable for lubrication method: manual
Suitable for: Protecting 'Other', handtools & workshop equipment, mechanical machine parts
Colour: Colourless
Density at 20°C (g/cm3): 0,82
NSF registration number: 128501
Odour: Characteristic

Safety & Compliance

What is F-Active® technology


Interflon F-Active represents a breakthrough in industrial cleaning. It’s not just a cleaner—it’s an activation technology designed to maximize efficiency and minimize downtime. The F-Active formula penetrates deep to aggressively lift and suspend heavy contaminants—including stubborn grease, oil, carbon, and brake dust—allowing them to be easily removed. Crucially, the non-corrosive solvents are engineered to evaporate completely and quickly, leaving behind zero residue. This means you eliminate the need for time-consuming rinsing or wiping, and your surfaces are perfectly conditioned for immediate lubrication or continued operation. Choose an F-Active product for a clean you can trust, especially in sensitive areas where compliance is critical.

  • Biological action that uses enzymes to break down organic matter
  • Powerful degreasing agents that are highly effective against oils, greases, waxes and resins
  • Many F-Active products are label free, biodegradable and residue free
  • A number of products are NSF certified for use in food and pharmaceutical environments

Experience powerful cleaning with Interflon’s F-Active Technology—available in select high-performance cleaners

FAQ

We ship to all delivery addresses in the continental US through the web store.  For Canadian shipping, please call us directly at 1-877-346-5823 or email us at [email protected].

Some larger packaging sizes, and specific products may not be listed, but we should be able to help you source the items you need.  Please contact us at 1-877-346-5823 or email us at [email protected]

No, there is no minimum quantity.

Our lubrication experts can match you with the right lubricant for your application needs.  You can call us at 1-877-346-5823 or email us at webstore-us@interflon.com.