Interflon Food Grease 2
Multifunctional lubrication grease
$102.99
- NSF H1 universal grease
- Long lasting and reduces friction
- Water & contaminants protection
- Inhibits rust and corrosion
- General component lubrication
Product information "Food Grease 2"
- Universal Grease for Almost All Applications
- Reduces Friction Significantly Better than Conventional Lubricants
- Protects Against Water and Contaminants
- Resistant to Water, Steam and Pollution
- Inhibits Rust and Corrosion
- Good Adhesion Properties
- Clean and Does Not Stain
- Transparent, Allowing for Easy Visual Inspection
- PFAS-Free
Multipurpose grease with MicPol® Technology, particularly suitable for the lubrication of foodstuff machines. Provides outstanding protection against wear, rust and corrosion and extends grease life for problem-free operation in high water wash areas. Allows safely extending service intervals to reduce costly maintenance, lubricant consumption and energy usage. Intended for the general lubrication of machine parts with slow to medium-fast movements and light to heavy loads in the food and beverage and pharmaceutical plants. Interflon Food Grease 2 is listed by the NSF for the use in applications with incidental food contact.
Application areas
Formulated for a myriad of heavy duty grease applications in food and beverage processing environments and the industry. Applications include the lubrication of slow to moderate moving bearings, shafts, chains, slide ways and open gears in food processing machines, as well as in industries where contamination with the lubricant is to be prevented at all costs, i.e. the textile industry.
Instructions for use
For best results, parts should be cleaned or purged of the previous lubricant prior to use.
Specifications
| Micpol Technology: | Yes |
|---|---|
| Base(oil) viscosity (40°C): | 400 |
| Thickener: | Inorganic |
| Base oil viscosity at 40°C norm: | ASTM D445 |
| NLGI grade (consistency): | 2 |
| NLGI grade norm: | ASTM D217 |
| Max operating temperature (°C): | 150 |
| Min operating temperature (°C): | -20 |
| NSF certified: | H1 |
| Halal: | Yes |
| Kosher: | Yes |
| Vegan: | Yes |
| Shelf life (years): | 4 |
| PFAS-free: | Yes |
| MOAH-free: | Yes |
| Suitable for lubrication method: | manual |
| Dn-factor: | 250000 |
| Corrosion resistance: | Excellent (Emcor distilled 0-0) |
| Corrosion resistance norm: | DIN 51802 |
| Water resistance: | 1-90 |
| Water washout (%): | 2 |
| Copper corrosion: | 1b |
| Suitable for: | bearing, open gears |
| Applicable with hardware: | Drum Pump, Grease Gun, Lubejet Eco |
| Suitable for Single Point Lubricators: | Yes |
| Colour: | White |
| Copper corrosion norm: | ASTM D4048 |
| Density at 20°C (g/cm3): | 0.94 |
| Dropping point norm: | DIN 51801 |
| Grease code: | KPF2N-20 |
| Grease code norm: | DIN 51825 |
| NSF registration number: | 123822 |
| Oxidation resistance (kPa): | 14 |
| Oxidation resistance norm: | DIN 51808 |
Safety & Compliance
| Copper corrosion norm | ASTM D4048 |
|---|---|
| Dropping point norm | DIN 51801 |
| NLGI grade norm | ASTM D217 |
What is MicPol® technology?
MicPol® technology is Interflon's proprietary lubrication technology, specifically developed to reduce friction between moving parts to the lowest possible level.
Based on micronisation and polarisation, MicPol® technology uses ultra-fine additives that reach microscopic surface irregularities and adhere strongly to metal. Through alignment, netting and anchoring, these additives form a smooth, resilient tribofilm that provides long-lasting protection.
Key benefits of MicPol® technology:
- Consistently low friction across a wide range of speeds and load conditions
- Extended lubrication intervals and reduced lubricant consumption
- Reliable wear protection and longer component service life
- Enhanced protection against water, dust, dirt and corrosion
- Free from PFAS, PTFE, microplastics, silicones, nanomaterials and SVHCs