Interflon Grease HTG (aerosol)
Heavy duty” grease for very high temperature applications
$51.08
- High temperature, high load aerosol
- High working temp to 270°C (peak)
- Suited for shockloads & vibrations
- Corrosion & oxidation protection
- Barrier to water & contamination
Product information "Grease HTG (aerosol)"
- Resists Temperatures Up To 464°F Over A Long Span of Time or a Shorter Period Up To 518°F
- Excellent Protection Against Wear Under Extreme Temperature Conditions
- Reduced Torque When Starting Up and With Varying Loads
- Good Metal Adhesion
- Extends Service Life and Lubricating Intervals
- Resists to Water And Most Kinds of Chemicals
- Good Resistance Against Chemicals, Acids and Caustic Soda
- Excellent Penetration Qualities
- Aerosol Can Also Be Used in an Upside Down (Vertical) Position
- PFAS-Free
Supreme performance high temperature grease fortified with MicPol® Technology. Suitable for high temperature environments (up to 464°F) and exposure to water, dust or contamination. Its state-of-the-art formulation gives protection against wear at very high temperatures whilst standing up against high impact loads. Readily lowers replacement, repair and maintenance costs of general machine parts used in (food-stuff) environments. NSF H-2 Food Grade listed.
Application areas
Ball, roller, and slide bearings under heavy loads and at high temperatures, in the ceramic industry, chemical industry, asphalt centers, plastic processing industry, brick-yards, food industry etc.
Instructions for use
Shake before use. Use aerosol from a vertical (upright or upside down) position only. Mixing of Interflon Grease HTG (aerosol) with other greases has to be prevented. Thoroughly clean substrate or components with a solvent or alkaline cleaning agent and allow to dry. Apply Interflon Grease HTG (aerosol) on cold surfaces and allow penetrate for a few minutes. Applications at temperatures above 150°C need to re-lubricated regularly.
Specifications
| Micpol Technology: | Yes |
|---|---|
| Base(oil) viscosity (40°C): | 380 |
| Thickener: | Inorganic |
| Base oil viscosity at 40°C norm: | ASTM D445 |
| NLGI grade (consistency): | 2 |
| NLGI grade norm: | ASTM D217 |
| Min operating temperature (°C): | -20 |
| NSF certified: | H2 |
| Shelf life (years): | 6 |
| Suitable for lubrication method: | manual |
| Dn-factor: | 250000 |
| 4-ball weld load: | 4200 N |
| Suitable for: | bearing, chains |
| 4-ball weld load norm: | DIN 51350-4 |
| Colour: | Brown |
| Density at 20°C (g/cm3): | 1.03 |
| Dropping point norm: | DIN 51801 |
| Grease code: | KFE2U-20 |
| Grease code norm: | DIN 51825 |
| NSF registration number: | 136435 |
Safety & Compliance
| Dropping point norm | DIN 51801 |
|---|---|
| NLGI grade norm | ASTM D217 |
What is MicPol® technology?
MicPol® technology is Interflon's proprietary lubrication technology, specifically developed to reduce friction between moving parts to the lowest possible level.
Based on micronisation and polarisation, MicPol® technology uses ultra-fine additives that reach microscopic surface irregularities and adhere strongly to metal. Through alignment, netting and anchoring, these additives form a smooth, resilient tribofilm that provides long-lasting protection.
Key benefits of MicPol® technology:
- Consistently low friction across a wide range of speeds and load conditions
- Extended lubrication intervals and reduced lubricant consumption
- Reliable wear protection and longer component service life
- Enhanced protection against water, dust, dirt and corrosion
- Free from PFAS, PTFE, microplastics, silicones, nanomaterials and SVHCs