Skip to main content Skip to search Skip to main navigation
Trusted by 100,000+ companies worldwide
Local expertise and support
PFAS-free lubrication

Product information "Grease LS2"

  • Exceptional, Long-Lasting Wear Resisting Properties
  • Water Washout Only Just 0,2 % (ASTMD-1264)
  • Prevents Loss of Lubricating Protection, Even Underwater
  • Stands Up Against High Impact Loads
  • Outstanding Shear Stability and Emergency-Run Characteristic
  • Transparent, Enabling Easy Inspections
  • Long Equipment Life and Low Consumption
  • Very Strong Adhesion, Including Smoothly Polished Pins and Bushes
  • Eliminates Stick-Slip
  • PFAS-Free


Long-threaded, extreme pressure grease with exceptional resistance to (salt) water and high impact (shock) loads. Designed for ultimate performance in the most exacting grease applications. Engineered to increase service life of bearings, guides, sliding surfaces, joints and other slow to moderately moving machine parts that operate under adverse conditions of extreme loads and low temperatures in high water wash areas in heavy industry, cold and outdoor environments, coal mines and at sea.


Fortified with MicPol®, to provide for exceptionally long-lasting protection against friction and wear with outstanding emergency-run characteristics. Can be applied either manually or by automatic greasing systems.

Application areas

Suitable for lubrication in heavy industry of bridges and locks; the transport industry, road construction, bearings with small tolerances, pin and bush connections, extensible sections of cranes, open gears, and bearings which come in contact with (salt) water regularly, etc.

Instructions for use

For best results, parts should be cleaned or purged of the previous lubricant prior to use.

Specifications

Micpol Technology: Yes
Thickener: Lithium-Calcium complex
Base oil viscosity at 40°C norm: ASTM D445
NLGI grade (consistency): 2
NLGI grade norm: ASTM D217
Max operating temperature (°C): 120
Min operating temperature (°C): -10
Shelf life (years): 4
Suitable for lubrication method: manual, system
Dn-factor: 120000
4-ball weld load: 700 kg
Corrosion resistance: Excellent (Emcor distilled 0-0)
Corrosion resistance norm: DIN 51802
Salt water corrosion resistance: Excellent (Emcor salt 0-0)
Water resistance: 1-90
Water resistance norm: DIN 51807
Water washout (%): 0.2
Copper corrosion: 1b
Suitable for: bearing, open gears, wire ropes
Applicable with hardware: Drum Pump, Grease Gun, Lubejet Eco
Suitable for Single Point Lubricators: Yes
4-ball weld load norm: ASTM D2596
Colour: Light brown
Copper corrosion norm: ASTM D4048
Density at 20°C (g/cm3): 0.92
Dropping point (>°C): 190
Dropping point norm: DIN 51801
Grease code: KPF2K-10
Grease code norm: DIN 51825
Salt water corrosion resistance norm: ISO 11007

Safety & Compliance

Copper corrosion norm ASTM D4048
Dropping point norm DIN 51801
NLGI grade norm ASTM D217

What is MicPol® technology?

MicPol® technology is Interflon's proprietary lubrication technology, specifically developed to reduce friction between moving parts to the lowest possible level. 

Based on micronisation and polarisation, MicPol® technology uses ultra-fine additives that reach microscopic surface irregularities and adhere strongly to metal. Through alignment, netting and anchoring, these additives form a smooth, resilient tribofilm that provides long-lasting protection. 

Key benefits of MicPol® technology: 

  • Consistently low friction across a wide range of speeds and load conditions
  • Extended lubrication intervals and reduced lubricant consumption
  • Reliable wear protection and longer component service life
  • Enhanced protection against water, dust, dirt and corrosion
  • Free from PFAS, PTFE, microplastics, silicones, nanomaterials and SVHCs

All our products are based on our exclusive MicPol® technology