Interflon Grease OG
Grease for the lubrication of heavy loaded open gears
$185.41
- Extremely loaded open gear grease
- Transparent lubricating film
- Resists highest (shock-)loads
- High wear and corrosion protection
- Superb adhesion & water resistance
Documents
Product information "Grease OG"
- Exceptional, Long-Lasting Reduction of Friction and Wear
- Excellent Protection Under Extreme Temperature Conditions
- Strong Adhesion to the Gears
- Resistant to Water Washout and Spray-Off
- Outstanding Emergency-Run Characteristics
- Stands Up Against Very High Impact (Shock) Loads
- Inhibits Rust and Corrosion
- Transparent, Enabling Easy Inspections
- Protects Against Water, Steam and Dirt
- Fully Fledged Replacement for Grease on Bitumen and Greases Containing Graphite or Mos2
- PFAS-Free
Water resistant lithium-calcium complex grease with MicPol® Technology for heavily loaded open gears, worm wheels and guides. Provides excellent lubrication and highly durable protection for slow moving machine parts. Highly resistant to high pressure, vibration and shock loads. Penetrates between the parts and protects against rust and corrosion. Resistant to wash off due to excellent metal adhesion. Does not drip and does not harden. The transparency makes thorough inspection of parts easy.
Application areas
Especially suited for the lubrication of all kinds of slow moving open gear transmissions which are exposed to very high pressures and vibrations. Also for parts in corrosive environments with moisture, steam, extreme weather conditions and (salt) water. Can be applied in locks, bridges, chains of heavy motors, sliding bearings, pin and bush connections etc.
Instructions for use
For best results, parts should be cleaned or purged of the previous lubricant prior to use. Apply grease thinly.
Specifications
| Micpol Technology: | Yes |
|---|---|
| Base(oil) viscosity (40°C): | 800 |
| Thickener: | Lithium-Calcium complex |
| Base oil viscosity at 40°C norm: | ASTM D445 |
| NLGI grade (consistency): | 0 |
| NLGI grade norm: | ASTM D217 |
| Max operating temperature (°C): | 120 |
| Min operating temperature (°C): | -10 |
| Shelf life (years): | 4 |
| Suitable for lubrication method: | manual |
| Dn-factor: | 60000 |
| 4-ball weld load: | > 800 kg |
| Corrosion resistance: | Excellent (Emcor distilled 0-0) |
| Corrosion resistance norm: | DIN 51802 |
| Water resistance: | 0-90 |
| Water resistance norm: | DIN 51807 |
| Water washout (%): | 14 |
| Copper corrosion: | 1a |
| Suitable for: | bearing, open gears, wire ropes |
| Applicable with hardware: | Drum Pump, Grease Gun, Lubejet Eco |
| Suitable for Single Point Lubricators: | Yes |
| 4-ball weld load norm: | ASTM D2596 |
| Colour: | Light brown |
| Copper corrosion norm: | ASTM D4048 |
| Density at 20°C (g/cm3): | 0.96 |
| Dropping point (>°C): | 250 |
| Dropping point norm: | DIN 51801 |
| Grease code: | OGPF0K-10 |
| Grease code norm: | DIN 51825 |
Safety & Compliance
| Copper corrosion norm | ASTM D4048 |
|---|---|
| Dropping point norm | DIN 51801 |
| NLGI grade norm | ASTM D217 |
What is MicPol® technology?
MicPol® technology is Interflon's proprietary lubrication technology, specifically developed to reduce friction between moving parts to the lowest possible level.
Based on micronisation and polarisation, MicPol® technology uses ultra-fine additives that reach microscopic surface irregularities and adhere strongly to metal. Through alignment, netting and anchoring, these additives form a smooth, resilient tribofilm that provides long-lasting protection.
Key benefits of MicPol® technology:
- Consistently low friction across a wide range of speeds and load conditions
- Extended lubrication intervals and reduced lubricant consumption
- Reliable wear protection and longer component service life
- Enhanced protection against water, dust, dirt and corrosion
- Free from PFAS, PTFE, microplastics, silicones, nanomaterials and SVHCs