Skip image gallery
MicPol
Interflon Grease OG (aerosol)
Grease for the lubrication of heavy loaded open gears
$56.55
- Extremely loaded open gear aerosol
- Transparent film & easy application
- Resists highest (shock-)loads
- High wear and corrosion protection
- Superb adhesion & water resistance
Product number:
9575
|
Product unit:
aerosol
Documents
Product information "Grease OG (aerosol)"
- Exceptional, Long-Lasting Reduction of Friction and Wear
- Excellent Protection Against Wear Under Extreme Temperature Conditions
- Very Appropriate for All Open Transmission, Strong Adhesion to the Gears
- Outstanding Emergency-Run Characteristics
- Stands Up Against Very High Impact (Shock) Loads
- Protects Against Water, Steam And Dirt
- Inhibits Rust And Corrosion
- Fully Fledged Replacement For Grease On Bitumen And Greases Containing Graphite Or Mos2
- Transparent, Enabling Easy Inspections
- Aerosol Can Also Be Used In An Upside Down (Vertical) Position
- PFAS-Free
Exceptionally long lasting, transparent
lithium-calcium-complex grease for open gears delivering the advantages of
Interflon's unconventional Lubrication Technology. Engineered for the
problem-free lubrication of open and semi-enclosed gear drives over a wide
range of requirements and environmental conditions.
Reduces mechanical power-loss and operational costs and exhibits excellent
anti-wear, extreme pressure and anti-rust characteristics. Perfectly suitable
for a long service life in applications where high load-carrying capacity under
shock load conditions persist.
Clearly a step above the rest. This product allows you to safely extend open
gearing service intervals to reduce costly maintenance, lubricant consumption
and component failure whilst improving productivity. Strong reduction of
lubricant costs by lower grease consumption.
Application areas
Especially suited for the lubrication of all kinds of slow moving open gear transmissions which are exposed to very high pressures and vibrations. Also for parts in corrosive environments with moisture, steam, extreme weather conditions and (salt) water. Can be applied in locks, bridges, chains of heavy motors, sliding bearings, pin and bush connections etc.Instructions for use
Shake before use. Use aerosol from a vertical (upright or upside down) position only. Before use, thoroughly clean parts and remove or wash off old grease. Thoroughly clean substrate or components with a solvent or alkaline cleaning agent and allow to dry. Apply grease thinly.Specifications
| Micpol Technology: | Yes |
|---|---|
| Base(oil) Viscosity (40C): | 800 |
| Base oil viscosity at 40°C norm: | ASTM D445 |
| Thickener: | Lithium-Calcium complex |
| NLGI grade (consistency): | 0 |
| NLGI grade norm: | ASTM D217 |
| Max operating temperature (C): | 120 |
| Min operating temperature (C): | -10 |
| Shelf_life (years): | 6 |
| NSF PFAS free: | Yes |
| Suitable for lubrication method: | manual |
| Dn-factor: | 60000 |
| dry Lubricant: | No |
| 4-ball weld load: | > 800 kg |
| SKF Emcor distilled water: | 0-0 |
| SKF Emcor distilled water norm: | DIN 51802 |
| Water resistance: | 0-90 |
| Water resistance norm: | DIN 51807 |
| Water washout (%): | 14 |
| Copper corrosion: | 1a |
| Suitable for: | bearing, chains, open gears, wire ropes |
| 4-ball weld load norm: | ASTM D2596 |
| Colour: | Light brown |
| Copper corrosion norm: | ASTM D4048 |
| Density at 20°C (g/cm3): | 0,96 |
| Dropping point (>°C): | 250 |
| Dropping point norm: | DIN 51801 |
| Grease code: | OGPF0K-10 |
| Grease code norm: | DIN 51825 |
Safety & Compliance
| Copper corrosion norm | ASTM D4048 |
|---|---|
| Dropping point norm | DIN 51801 |
| NLGI grade norm | ASTM D217 |
What is MicPol® technology
MicPol® technology is Interflon’s unique technology that strengthens and improves the original properties of the lubricants. MicPol® is a combination of micronization and polarization. Micronization is a process where components of the lubricant are reduced in such a way that they can penetrate all pores and sub-pores of a surface to be lubricated. Polarization is the components that are charged during the production process. This ensures a unique adhesion to the surfaces to be lubricated. Advantages of MicPol® include;
- Longer lasting lubrication (extends PM intervals)
- Runs at much lower friction than conventional or synthetic oils
- Dirt, sand and water repellent
- Lubricant lasts longer (less oil needed)
- Better resistance to high pressure and loads
Where do you ship?
We ship to all delivery addresses in the continental US through the web store. For Canadian shipping, please call us directly at 1-877-346-5823 or email us at [email protected].
The product or the specific container size I'm looking for is not on the web store - how can I buy it?
Some larger packaging sizes, and specific products may not be listed, but we should be able to help you source the items you need. Please contact us at 1-877-346-5823 or email us at [email protected]
I'm not sure which product is right for me. How can I get technical support or product recommendations?
Our lubrication experts can match you with the right lubricant for your application needs. You can call us at 1-877-346-5823 or email us at webstore-us@interflon.com.