Oils
Multi-purpose dry film lubricant in a spray can
Interflon
Lube TF (aerosol)
A highly versatile, dry-film lubricating oil spray. Designed for general machine, cable and chain lubrication and maintenance applications across a wide range of industries and environmental conditions.
Fortified with MicPol® technology, it forms a highly durable, non-staining dry lubrication film that virtually eliminates wear on moving parts. It penetrates deeply, cleans effectively, removes rust, and frees seized components.
Suitable for both indoor and outdoor use, it performs reliably under high-pressure loads and in exposure to fresh or salt water, extreme temperatures, dirt, sunlight, wind, and other challenging environments.
Distinctive Properties and Key Advantages
- Excellent, long lasting protection against wear
- Inhibits rust and corrosion
- Strong resistance to water washout and contamination
- Excellent dry run characteristics
- Does not fling off and stain and leaves no residue
- Displaces moisture, also in electrical applications
- PFAS-free
One solution, multiple uses
Interflon Lube TF (aerosol) replaces up to 10 conventional products:
- Penetrating oil
- Chain spray
- Contact spray
- Gear spray
- Silicone spray
- Cutting oil
- Rust solvent
- Dry lubricant
- Graphite spray
- Corrosion protector
Its multi-purpose performance simplifies maintenance, reduces inventory, and lowers overall costs, making it the smart choice for efficient operations.
Frequesntly Asked Questions
Chains in dusty environments can wear quickly when a wet lubricant traps dust and turns it into an abrasive paste. Interflon Lube TF (aerosol) penetrates even into the most inaccessible areas and leaves a dry lubricating film that does not attract dirt, dust and other abrasives. Clean the chain first with a solvent or alkaline cleaning agent, spray a thin layer, allow it to penetrate and wipe off the excess. A thin layer with occasional re-lubrication gives a better result than a thick one.
View all cleaners
Chains in dusty environments can wear quickly when a wet lubricant traps dust and turns it into an abrasive paste. Interflon Lube TF (aerosol) penetrates even into the most inaccessible areas and leaves a dry lubricating film that does not attract dirt, dust and other abrasives. Clean the chain first with a solvent or alkaline cleaning agent, spray a thin layer, allow it to penetrate and wipe off the excess. A thin layer with occasional re-lubrication gives a better result than a thick one.
Interflon Lube TF (aerosol) is a PFAS-free alternative to PTFE dry lubricants for chains, cables, guides, sliding tracks and other moving parts. It is a dry-film lubricant with MicPol® technology that holds up to high pressures. Whether it matches your current lubricant in your own application is best confirmed in practice.
Want to test this on your own equipment first?
Discuss a pilot with an Interflon Technical Advisor, free of charge and without obligation.
Results depend on the application, the load and the contamination, but in a published case at a car body paint shop, switching to Interflon Lube TF (aerosol) extended the fly roller chain maintenance interval from four to twelve weeks. Each intervention took 30 minutes instead of 40, less lubricant was needed and the extra cleaning cycle was no longer necessary. Annual maintenance costs fell from €27,160 to €10,345. In another published case in the chemical industry, Lube TF (aerosol) allowed longer lubrication intervals and extended the service life of pneumatic cylinders on a robot, with annual savings above €6,500.
Interflon Lube TF (aerosol) displaces moisture, resists water wash-off and protects against corrosion, so it suits parts exposed to moisture. It can be applied from -43 °C to 170 °C; the upper limit applies once the solvent has evaporated. Use the can from a vertical position only, upright or upside down.
