Interflon Lube TF multi-purpose dry-film lubricating oil with MicPol®

Oils

High-performance multi-purpose dry lubricant

Interflon
Lube TF

Interflon Lube TF is a highly versatile, industrial quality dry-film lubricant fortified with MicPol®. It delivers much longer lubricant life with better resistance to water and considerably less friction and wear.

Also available as an aerosol spray

Distinctive properties and key advantages

  • Excellent, long lasting protection against wear 
  • Inhibits rust and corrosion 
  • Strong resistance to water washout and contamination 
  • Excellent dry run characteristics 
  • Does not fling off and stain and leaves no residue 
  • Displaces moisture, also in electrical applications 
  • PFAS-free

Goes on wet, cleanses, displaces moisture, breaks down deposits and penetrates even into the most inaccessible areas. Loosens seized, rusted and frozen parts and prevents dirt accumulation and the formation of rust and other corrosives.

Forms a highly durable, non-staining dry lubrication film that virtually eliminates wear on moving parts. Holds up to high pressures, resists water wash-off, eliminates stick-slip and will not attract dirt, dust and other abrasives.

Examples of applications in various industries

Interflon Lube TF is designed for a multitude of general machine, cable and chain lubrication and maintenance applications in a wide range of industries and environmental conditions.

  • Airports
    Baggage handling transport system chains become dirty and noisy because of the dusty environment they operate in. Conventional wet lubricants  attract dust, creating an abrasive paste that provokes premature wear. Interflon Lube TF keeps chains lubricated and clean!
  • Rail
    The roller mechanisms and supports of rollers on rail switches can become stuck due to fine particles and dirt build-up, which can lead to switching failures. Applying Interflon Lube TF allows even stiff or partially blocked track rollers to function under failure conditions.
  • Injection Moulding
    Before going to production, different parts of the mould (ejector pins, guide pins, runners) must be well and carefully lubricated. Lube TF provides a dry lubricating film that does not drip and is anti-corrosive.

Contact us

Interflon head office employee
+45 41 69 71 43