Cleaners
Multi-Surface foam cleaner & degreaser
Interflon
Foam Clean (aerosol)
Provides a heavy duty foam that quickly breaks down grease and grime. Engineered for the cleansing and degreasing of glass, Acrylglas, mirrors, screens/displays/monitors, synthetic material, lacquering, metal and a lot of other hard waterproof surfaces in foodstuff environments.
All purpose
Removes effortlessly dirt, grease, dust, fingerprints and nicotine stains, residues of insects and other hard dirt from almost any surface or object. Leaves no residue. Not aggressive and readily biodegradable.
Overwhelming number of Applications
Popular applications include the maintenance of Glass Panels and Glass Doors, Displays, Equipment and Furniture in shops, restaurants, bars, exhibitions and department stores as well as TV Flat-screens, Touch-screens, Cash registers, Laptops, PDA's, Smart phones and Navigation Systems.
Distinctive Properties and Key Advantages
- Rapidly breaks down grease and grime
- Leaves no Residue
- Very easy to apply
- Readily Biodegradable
- Food Grade Approved
Frequently Asked Questions
Interflon Foam Clean (aerosol) is not aggressive according to its technical data sheet, which describes it as especially suited for safely cleaning flat screens, touchscreen registers and TFT screens, unless the device's operating manual excludes a particular cleaner.
Coatings and transparent plastics can still react differently to cleaning agents. Test a small, inconspicuous area first and take care with anti-reflection coatings and transparent plastics.
Spray, let the foam work briefly and rub dry with a soft cloth or paper. In food processing areas, follow the conditions of its NSF A1 registration.
Streaks on glass, mirrors and acrylic glass can appear when a cleaner dries on the surface before it is wiped off, or when loosened dirt runs down over areas that are already clean.
Interflon Foam Clean (aerosol) dries without traces. Its technical data sheet advises not to apply it to hot surfaces, and not to use it or let it dry in direct sunlight. On large vertical surfaces, apply the foam from the bottom upwards so the whole area is covered, then wipe from the top downwards to prevent streak marks.
Interflon Foam Clean (aerosol) is intended for glass, acrylic glass, mirrors, screens, synthetic material, lacquered surfaces, metal and other waterproof surfaces, where it removes dirt, grease, fingerprints and insect residues.
Machine parts such as bearings, chains and gear wheels are not among its listed applications. For cleaning and degreasing those parts, Interflon Metal Clean F (aerosol) is a good choice, it evaporates rapidly without leaving residues, but must not be used on rubber, plastic components or safety glass.
For abrasive and matt finish stainless steel, Interflon Dry Clean Stainless Steel (aerosol) is applied after cleaning and leaves a protective coating.
Not sure which Interflon cleaner suits your surfaces?
Ask an Interflon Technical Advisor, entirely without obligation.
Interflon Foam Clean (aerosol) is NSF A1 registered (registration number 138681) and listed by NSF for use in the food industry as a general cleaner.
An A1 registration covers use on surfaces in and around food processing areas where the product is not intended for direct food contact.
Food products and packaging must be removed or protected before use, and cleaned surfaces must be rinsed with potable water afterwards.
Its technical data sheet lists it as Halal and Kosher, and its biodegradability is above 60% according to OECD 301F.
Interflon Foam Clean (aerosol) has a shelf life of 4 years in its original, unopened packaging. Avoid storage below 0 °C to guarantee product quality. The first four digits of the 8-digit batch number show the year and month of manufacture (YY/MM). The can is classified as an extremely flammable aerosol and is under pressure. Protect it from sunlight, do not expose it to temperatures above 50 °C, and keep it away from heat, sparks and other ignition sources.
