Interflon lubricants for paper recycling

Industry

Paper recycling

Interflon helps to save more energy

The process of waste paper recycling most often involves mixing used/old paper with water and chemicals to break it down. Not really a friendly environment to maintain equipment in good conditions.

Energy consumption is reduced by recycling, although there is debate concerning the actual energy savings realized. Energy organizations claim a 40% reduction in energy when paper is recycled versus paper made with unrecycled pulp. But criticasters say recycling paper to make pulp actually consumes more fossil fuels than making new pulp via the kraft process. One thing is for sure: Interflon products contribute to less energy use.

Some applications in Paper recycling

Hydraulic installation Balemaster Paper press

Due to the high loads, the hydraulic system of paper presses suffers a lot, resulting in high temperatures and high Amp. Conventional hydraulic oils do not always withstand those heavy loads and cannot avoid system shut-down when Amp passes the Amp limits. Causing costly down-time and high energy consumptions.

Adding Interflon Finnoly N-251H to the hydraulic oil used will significantly reduce friction, causing the temperature to drop dramatically (in one case from 71,1˚C to 47,9˚C) and reducing energy consumption (in that same case with 18% to 20%).
 

Interflon lubricants for less fricition in paper presses
Interflon chain lubrication solutions to reduce energy consumption

Roller chains conveyor belt

Water from PMD packaging and dust from cardboard falls on the chains. With conventional oils corrosion cannot be avoided, causing premature wear and tear and high energy consumption. Apart from this, the dust creates abrasive build-up on the chains, wearing out the rollers that will eventually block and no longer slide smoothly over the guide rails. The result is high replacement costs and down-time.

Interflon Food Lube G150 provides a dry long lasting MicPol® lubrication film, avoiding dust and debris to attach. The result: no build-up anymore, reducing wear and guaranteeing a smooth sliding. Since MicPol® repels water, corrosion is prevented. Some customers report less noise, proving that friction went down, generating energy savings as well.

Contact us

Interflon head office employee
+971 4 340 42 43