Case studies

Hydraulics & pneumatics

No bearing failure!

Lubrication of pneumatic equipment

Initial situation

As a result of the moisture present, pneumatic equipment used to pluck the ducks often gets jammed during the production process. Every two months the internal bearings must be replaced, because these jam due to water and rust, stopping the whole process. Repairs take more than two hours. The price of replacement is € 5,000 and needs to be done every two years.

Our solution

The customer made a wise choice to use Interflon Food Lube PN32 (NSF-H1) with good results. Since the customer started using the Interflon product 18 months ago, no bearing has had to be replaced and no machines have jammed. The customer is currently determining the time after which the equipment need to be replaced. The customer is very satisfied with the results and now uses the product for all pneumatic systems in the production process.

Result

Calculation of savings

The annual costs for replacing bearings before:
6 replacements x 4 machines x 2 bearings x € 13 = € 624.

Annual labour costs:
6 interventions x 4 machines x 2 man hours x € 17 = € 816.
Total costs for materials and labour : € 624 + € 816 = € 1,440

Annual costs in the current situation:
12 litres Fin Food Lube PN 32 x € 39/ litres = € 468.
Labour costs for filling the lubrication units:
4 hours per year x € 17 = € 68
Total costs of oil and labour : € 468 + € 68 = € 536.

Annual savings in the current situation:
€ 1440 – € 536 = € 904.

Tag: Interflon Food Lube PN32 | Interflon Food Lube PN32